Motor Getting Too Hot Airsoft Gate Titan

Gate TITAN v2 Advanced Consummate Set Rear Wired MOSFET

Reference TTN2-AR

TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adapt your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices . Gain a tactical advantage cheers to the extremely fast trigger response, option of adjusting trigger sensitivity to your preferences and many other useful functions. Requite your AEG a new lease of life!

Cheers to the optical sensors we have eliminated the problem of faulty switches that can occur in competitors' drib-in mosfets. The trigger has no mechanical connections with the PCB. This eliminates mechanical stresses and provides for loftier reliability.

Description
Product Details

Description

TITAN has no less than eight sensors!

one gear sensor
2 selector sensors
v trigger sensors

You can trust TITAN because:

Every time you pull the trigger gearbox completes the right cycle. The gears end exactly where they should. The gearbox works efficiently.
It is protected against short-circuits, overheating and overloading
It protects the battery against over-discharge
It significantly improves bombardment life, rate of fire, spring life and gearbox reliability(when pre-cocking is off)
It is compatible with the strongest AEG replicas and batteries (ready to apply with LiPo fourteen.8V, 5000 mAh, 60C)

Why TITAN is and then special?

It has a user-friendly configuration via the Tactical Programming Bill of fare and/or GATE Control Station
Information technology has option to make firmware updates via the cyberspace
It has innovative optical sensors instead of mechanical switches that tin exist prone to faults
It replicates a trigger response like in a real gun
It replaces the cut-off lever
It is uniform with DSG and SSG gears
It is compatible with well-nigh v2 gearboxes (including cnc) on the market without any modification

Kit contents:

TITAN V2 with ADVANCED firmware edition (rear or forepart wired)
USB-Link for GATE Control Station™ App
USB Cables:
a) USB-A to Micro-USB (i.5m / 4ft 11in)
b) USB-C to Micro-USB (0.6m / 1ft 11in)
c) Micro-USB to Micro-USB (0.6m / 1ft 11in)
Installation Kit
Quickstart Guides

Get ready for the amazing functions such equally:

TRIGGER SENSITIVITY Aligning

Five trigger sensors allow yous to control trigger sensitivity. You do not have to detach your AEG.

Simply utilise the Tactical Programming Card or the GATE Control Station™ App to adapt the trigger to your

preferences and level of skills.

CONFIGURABLE Burn SELECTOR (gen.ii)

Two selector sensors allow you to apply upwards to vi fire selector modes, including innovative SEMI-Flare-up-Automobile mode:

Prophylactic-SEMI-AUTO
Prophylactic-SEMI-SEMI
SAFE-SEMI-BURST
SAFE-Burst-AUTO
Rubber-SEMI-Flare-up/Motorcar (short press - BURST, long press - Car)
SEMI-BURST-AUTO (SAFE mode via the fast switch SAFE-SEMI-SAFE)

Cycle DETECTION

Thanks to the gear sensor, TITAN precisely detects in which position the cycle should finish.

Therefore, even the shortest trigger action produces at to the lowest degree ane full cycle.

Thanks to the wheel detection function you go:

Automated Burst – in that location is no need to set the outburst time. You can set the burst between 2 and 10 shots;
Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO modes and at that place is no
need to ready the pre-cocking heave manually. Y'all can but set the pre-cocking as loftier, mid or low;
Full Cycle - when the pre-cocking is off, TITAN ensures that the gearbox completes a full cycle.
Y'all gain a higher reliability.

PRE-COCKING (gen.2*)

Victory in the game is oft a affair of fractions of seconds. Thanks to PRE-COCKING, you gain a trigger

reaction similar to a existent gun. It allows for initial spring compression, which speeds up the trigger response significantly.

At that place are twoPRE-COCKING MODES:

Auto MODE – the spring is automatically compressed after each shot,
SMART MODE – slow trigger action compresses the leap, and fast trigger action fires the shot.

And 3PRE-COCKING BOOST options: HIGH / MID / LOW

*Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and in that location is no demand to set the pre-cocking

boost manually Please note: using PRE-COCKING increases wear and tear on the gearbox.

BURST (gen.2*)

The burst enables you lot to shoot a pre-adamant number of BBs, which is very useful in MILSLIM and

when using low-caps.

* At that place is no need to set up burst time. You can hands set up outburst between 2 and x shots.

ROF CONTROL

This enables a reduction in a gun's rate of fire. You apply stronger LiPo batteries, and notwithstanding take a

ROF just like in a real gun.

ROF STAB

Information technology allows you to change the way the ROF Command works:
ON - ROF Control uses PWM to decrease ROF. Thanks to this gearbox works smoothly what decreases wear and

tear of AEG internal parts.
OFF - ROF Command adds breaks between shots to decrease ROF. It gives you more realistic experience.

SNIPER DELAY

It lets yous to set filibuster betwixt each SEMI shots to simulate the delay from reload or recoil.

You lot can ready0.5s,1s,2s or3s delay.

SMART TRIGGER

Nosotros know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger

office. It enables you to achieve a faster trigger response. It works with the ROF Control System.

During the first shot, the microprocessor sets the ROF Command to 100%.

Subsequently the start shot, information technology switches to a previously programmed value (east.k. 50%). As a result, the first shot

is fired at a full ROF, and subsequent shots at a reduced ROF. The all-time results can be achieved by using a battery

with a higher than standard voltage. For case, if you use a 7.4V battery, y'all can replace information technology with eleven.1V.

In this way, yous volition achieve a faster trigger response with the aforementioned rate of fire every bit with a standard battery.
*Works only when ROF STAB is ON.

AUG Style

Savour two stage trigger. Activate AUG Mode and set 2 different trigger sensitivities. Pulling the trigger slightly

produces SEMI or Outburst fire and pulling the trigger farther produces Flare-up or Machine burn down

(depending on the fire selector mode).

BATTERY PROTECTION (gen.2*)

Protection against Over-Discharge of the Bombardment. Mod LiPo and LiFe batteries are very sensitive to over-discharge.

If you lot do non want to damage the battery and you care nearly its service life, this protection is indispensable.

The microprocessor monitors the bombardment voltage constantly. When the voltage drops down to a disquisitional level,

it will not allow firing.

*TITAN detects the number of cells automatically. There is no need to reprogram TITAN every fourth dimension y'all

supervene upon the battery.

LOW BATTERY Alarm

When the battery voltage drops to a predefined level, the motor volition vibrate at regular intervals.

SMART FUSE

We have developed an electronic fuse with an accurate current sensor. A combination of current,

voltage and temperature measurements makes your AEG installation highly reliable.

It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed,

the office protects the motor and bombardment against damage.

ADAPTIVE Agile BRAKE

Information technology automatically adjusts the motor's braking ability according to your needs. This prolongs the lifespan of the motor.

MOSFET

Do y'all desire to achieve a higher ROF and faster trigger response? Are you lot planning a ability upgrade of your gun?

In that case, y'all need a MOSFET.

It targets the energy from the battery direct to the motor, bypassing the mechanical trigger contacts. As a result,

you lot proceeds a higher ROF of the gun and a faster trigger response.

Congenital-IN SELF-Exam

This allows you to apace check whether the drib-in module is working properly.

It helps to locate where the trouble lies when anything goes wrong.

COATING

Thanks to its special conformal blanket, our production is resistant to atmospheric conditions

(Military Specification MIL-V-173C).

DEANS-T Set

The product has factory-fitted low-resistance deans-t connectors.

MINI-TAMIYA ADAPTER

Thank you to the Mini Tamiya Adapters included in the kit, you can smoothly connect the drop-in module to your original

(stock) installation.

xiv.8V LI-PO Set up

The drop-in module can be used with batteries up to and including 14.8V LI-PO.

The minimum operating voltage is 3V and maximum is 17V.

PRINTED QUICKSTART

Brand your adventure start more easily with a new product. The quickstart contains bones information and hints.

Product Details

Reference TTN2-AR

16 other products in the aforementioned category:

Gate NanoHARD third gen AEG Controller 8 functions

It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (War machine Specification MIL-V-173C). Bombardment protection supports: Li-Po 7.4V / 11.1V / 14.8V. You tin besides disable the protection and use other batteries.

Gate TITAN v3 Bones Module MOSFET for AEG

TITAN V3™ Basic Module - the all-time if y'all long for having TITAN in two or more airsoft guns. And then y'all do not need the second USB-Link from the Avant-garde set. Information technology includes TITAN with Basic firmware edition. The Basic firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity simply crave highest quality....

Arma Tech - Wire - Silver Plated - 200 cm

High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to loftier voltage and temperature ROHS document

Price €9.95

Out-of-Stock

Gate TITAN v2 Avant-garde Complete Set front Wired MOSFET

TITAN V2™ is an AEG Control Organization for V2 gearboxes which will transform your AEG into an advanced training weapon. Conform your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical reward thanks to the extremely fast trigger response, pick of adjusting trigger sensitivity to your...

Gate NanoASR third gen MOSFET AEG

NanoASR is the latest standard third generation MOSFET. The application of the almost up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the marketplace. Cheers to its special coating, it is resistant to atmospheric conditions.

Ultra Deans T-plug set up

Plug and socket gear up. Large contact surface. Estrus resistant polymer. Held in place with spring tension.

AEG Heatshrinks Prepare

AEG Heatshrinks set contains 21 heatshrink tubes, all 9 cm [3,5 inch] long.

GATE PROGRAMMING BUTTON FOR MOSFETS

Replacement programming button needed for some GATE brand MOSFETs. one programming button Compatible with: MERF three.2 and NanoHARD *Upgrading / repairing airsoft guns should but exist washed past skilled technicians. Airsoftguns.ie is non liable for any damages caused past the improper installation of the parts we sell.

FUSE 25A GLASS TUBE - 30MM

Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this minor part protects the motor from burning out in case of mechanical bug.

Gate MERF three.two gen.3 Mosfet x functions

Multifunctional programmable 3rd generation MOSFET. The system has 10 functions. Its latest feature is the 3-rd Burst Way, which allows for limiting the number of shots. The system allows for lossless charge per unit of burn aligning. It protects Li-Ion batteries: LiPoly and LiFePO4. It has a built-in active brake and it protects contacts confronting damage. The...

Gate WARFET Mosfet AEG 20 functions

WARFET is GATE's most advanced AEG Command System. It has 20 functions and almost six million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - But PLUG&PLAY, NO SOLDERING REQUIRED

USB-Link 2 for GATE Control Station App

The USB-Link is used for connecting GATE TITAN and ASTER with PC, Mac or Android devices. Kit contents: USB-Link for GCS app USB-C cable [0.6 g / one ft 11 in] Micro-USB cablevision [0.6 grand / 1 ft 11 in] 'Troubleshooting' Card Quickstart Guide